Is your evaporative cooler not pumping water, failing to fill or blowing air without the cooling you expect?
The problem may involve the water supply, inlet valve, circulation pump or controls. ComfyHome Heating & Cooling provides evaporative cooling fault diagnosis and repairs across Melbourne.
Call 1300 266 394 or book a service assessment.
Call Now: 1300 266 394Book a Service
These symptoms can have different causes.
If water is not entering the cooler, the technician needs to assess the water supply and filling system. If water enters the reservoir but does not reach the cooling pads, the pump and distribution system need checking.
A cooler that appears to be “not pumping water” does not automatically need a replacement pump.
An interrupted water supply or a faulty inlet valve can prevent the reservoir from filling correctly.
A faulty pump may prevent water from reaching the cooling pads. A technician needs to check operation before recommending replacement.
Blockages or damaged distribution components may prevent water from reaching the pads evenly.
Fan-only mode does not provide evaporative cooling. Depending on the model, normal start-up may also include filling and pre-wetting. Follow your model’s operating instructions before assuming there is a fault.
A Mill Park customer contacted ComfyHome because no water was entering their Bonaire Integra II VSM65 evaporative cooler, and the system would not start normally.
Our technician identified that the water inlet solenoid valve was not operating. After repair, water circulation was restored.
The existing ComfyHome project photograph shows water circulating inside the cooler after the repair. This was an inlet-valve fault, rather than a confirmed circulation-pump failure.

Check the normal controller settings and confirm that cooling mode is selected. Allow for the start-up process described in your owner’s manual, and note any error message.
Do not climb onto the roof, remove covers, bypass controls or attempt electrical repairs.
If the system still does not circulate water or cool properly, switch it off using its normal controls and arrange an assessment.
For ongoing care, explore our evaporative cooling service in Melbourne.
Tell us your suburb, cooler brand and model, any controller error message, and what happens when you select cooling.
ComfyHome can assess the fault and recommend suitable repairs. Replacement parts and additional work are quoted separately.
Call 1300 266 394 or request a service appointment online.
Call Now: 1300 266 394Book a Service
No. Water supply, inlet-valve, distribution and control problems can produce similar symptoms. Diagnosis helps identify the actual fault.
Check whether fan-only mode is selected. If cooling mode is selected, a water-system fault or another operating issue may need investigation.
ComfyHome services and repairs Bonaire and Breezair evaporative coolers, subject to unit condition and suitable replacement-part availability.
See our guide to an evaporative cooler leaking water for common causes and the Lower Plenty repair case.
Comfyhome Heating Cooling adheres to a customer-centric approach in a bid to provide premium Melbourne heating and cooling solutions that fulfil your needs and align with your budget. We bring you convenience, affordability and quality of service you won’t find anywhere else.
Comfyhome services range from sales and installation of a comprehensive range of heating and air conditioning systems through to servicing and repairs to keep your system working optimally.